Tuesday, March 17, 2009

Watt meter

Here is my watt-meter & me, blinded by the flash :)

Saturday, March 7, 2009

Telephone Wires & Magnetic Fields
















These are pictures of the view from either a tree in my backyard or my dad's workshop roof. In the picture on the bottom, on the very left side you can see a transformer box (is that what its called?) for the power lines and in the picture on the top you can a see the telephone wires running across the picture right over the plumeria trees and under the window of our neighbors house. Basically, you can see telephone wires just about anywhere you go. A telephone wire is a conducting wire, so it has current passing through it, and thus it is an electromagnet. An electromagnet refers to a conducting material that gets magnatized only when a current flows through it. So, when current passes through the telephone wires, they are magnatized and exert an magnetic field. The strength of a magnetic field from a wire is directly related to the current passing through the wire and inversely related to the distance from the center of the wire. The direction of the magnetic field lines for the magnetic field of a wire can be determined using the right hand rule #2: your thumb points in the direction of the current and your fingers curl around in the direction that the magnetic field points. The magnetic field lines are always closed loops. 

Saturday, February 14, 2009

Bull Riding & Variable Resistors



Last spring break my parents and I went to Oregon to visit my brothers and go snowboarding. On one of the days we went to Mt. Hood and it turned out that is was some sort of family 'western' day and they had a mechanical bull inside the lodge that anyone could ride. So of course we got my brother Haakon to take a turn. In the right upper corner of the picture there is a guy standing at a red podium, this guy was controlling the bull. For little kids, he would make the bull go slow so it would be easier for them. He could control it by hand or just put it on a random setting that would make the bull do random movements. I realize looking back on this picture that the wiring of the controls must of had a variable resistor in order to allow the bull to move faster or slower. A variable resistor increases and decreases the length of the circuit in order to proportionately increase or decrease the the current and thus the speed. Resistance equals resistivity times length over cross sectional area, R= p(L/A). Resistance is directly proportional to resistivity and length, meaning that the larger the length the larger the resistance and vice versa. Resistance is indirectly proportional to cross sectional area. So, when the variable resistor increases the length, it is increasing the resistance and thus decreasing the current, so the bull will move slower. If the length is decreased, the resistance will decrease as well and there will be more current and the bull will move faster. 

Friday, January 30, 2009

Last spring break, my parents and I flew up to Oregon to visit my brothers who are going to school there. We snowboarded as much as possible, so we were outside a lot and it was really cold. As you can see from the picture, my brothers and I wore several layers of cloths in order to stay warm (they would be horrified with this picture because they prefer to act hard-core and wear as little as possible as a sign that they are true 'oregonians' ) Anyway, most of they layers we wear under our outer jackets are fleece and when you are trying to peel off your outer layers after getting home, an electric charge is created. Usually, the fabric of our sweaters would be neutral, however, because the weather was very cold and there was very little moisture in the air, when we peel the fabrics away from each other quickly, a charge is created. Even though they are the same fabric, one steals electrons from the other, like we saw with the tape and the saran rap in lab 21. Charge is always conserved, so if one sweater becomes positive, the other becomes equally negative. The charge that is on the sweaters is not very much and to make the sweater become neutral again you just have to touch it and your body acts as a ground, effectively removing extra charge. 

Sunday, January 25, 2009

Banked Turns for Bikes



This summer, my family and I went to California (same trip as the rope swing picture) and when my parents were done paddling we visited some colleges. These two pictures are of the campus as UC Davis. On the right, you can see that there are tons of bikes on campus and this picture was taken in the summer so classes weren't even in session, so during the regular year there would be even more. The picture on the right is a walkway/bike path that winds through campus and you can see that the path is banked as it curves down the hill. Banked curves allow for greater speeds, because on a banked curve centripetal force is made up of a combination of normal force and the x-direction component of friction. On level ground, centripetal force just comes from normal force, so on a banked curve, there is more centripetal force than on level ground. This added centripetal force allows bikers to travel at greater speeds without losing grip and flying off tangent to the curve. This banked path is especially important on a college campus because there are tons of bikers, all of whom are in a hurry and probably hyped up on caffeine :)

Wednesday, December 31, 2008

Rope Swing!

This summer, my cousin Malcolm and I went to California with my parents. My mom and her crew were paddling in the World Sprints races in Sacramento and Malcolm and I had gone with them to check out colleges. Malcolm and I had a lot of time on our hands because we had to hang out at the lake where the races were for an entire week, one day when we were out paddling we found a rope swing and so we spent a lot of time playing on it. We had a waterproof camera, so this is a picture of me on the rope swing. This picture is an example of circular motion. Circular motion is when an object is rotating about an axis that is outside of the object. Although you cannot see it, the end of the rope is connected to a tree branch, so the axis of my motion is the tree branch. When I let go of the rope, I will become a projectile and no longer have circular motion. This picture also shows kinetic and potential energy. At the moment of this picture, I have both KE and PE because I am in motion and I am above the water, which is my reference point. When I let go of the rope and start to fall toward the water, my KE will increase as my PE decreases. Just in this one picture there is so much physics going on! I never stopped to think this summer that something so entertaining and fun would have so much physics involved. 

Saturday, December 13, 2008

The Physics of Ice Skating

In February my friends and I went to the ice palace. In this picture we are skating together with our arms linked and playing the game where you spin in a circular motion with the person on the inside as our axis. The person on the outside of the line gets swung around and when they let go they go really fast. When our arms are all linked, we are generally moving in a uniform circular motion with the centripetal force coming from friction. When the person on the outside lets go, they move in a straight line, instead of continuing in a circle, because inertia causes us to resist change in motion and direction. When we whip the outside person around, we are exerting a torque. Torque = force x lever arm. The force comes from our bodies as we use our arms to push the outside person forward and the lever arm is measured from the axis (the inside person) to the force (which comes from the person next to the outside person), they the torque exerted on the outside person will be larger if you have more people in your line, because then the lever arm is longer.